Vibration frequency 1400 to 1700 RPM at high amplitude. These are the vibrators to use when high power is required and the site you are working on is not […]
Vibration frequency 2000 to 2300 RPM. During start up and shut down, the eccentrics are phase uncoupled to prevent any vibration when the operating frequency is below 33 Hz, […]
Free handling vibrators are used for the VIBRATORY PILE DRIVING and EXTRACTION of profiles (sheet piles, tubes, H piles, wooden piles, etc.) when constructing retaining walls, special foundations and civil engineering structures: sheet pile and mixed curtain walls, drilled tube piles, king post walls, vertical drains, compacting, etc.
The vibrators can be used in free handling mode or mounted on leader or excavator and be equipped with a variety of clamps to suit all types of profile.
The correct choice of vibrator depends on a number of factors (length and type of profile, nature of the terrain, etc.) we are at your disposal if you need advice.
The free handling hydraulic vibrators are powered by a hydraulic power plant with the correct output for your requirements.
The power plants can be equipped with radio controls and a crank case oil cooling system to extend the life of the bearings.